|
Glass Magic Home
*
Draw your design
* Stick on the Lead
* Solder the joins
*
* Colour Mixing Chart
*
Finish off
|
 Staining
- Make sure you work
in a well-ventilated space.
- After thoroughly
cleaning your Leaded glass and putting it on a level surface use your
eyedropper applicators to flood each section with Glass Magic Stains.
Fill until the stain is almost level with the top of the Lead.
- Test colours on
pieces of scrap glass first to check you have the colour you want.
- Between colours
clean your applicator with Glass Magic Thinners.
- If you spill stain
or notice air bubbles, suck these out with a clean eyedropper.
|
|